ENVIRO 6S SLIDING GATE OPERATOR
6
Manual operation
In case of power failure use manual release key to open or close gate manually, use the release key as
follow:
Fit the supplied key in the hole.
Turn the key
clockwise
to release the clutch.
Open and close the gate manually.
After power-restored use the manual release key to tight the clutch by turning the key
counterclockwise
and resume normal operation.
Fig.6
NOTE The gate operator needed reset limit after re-tight the clutch by turning the key
counterclockwise if the power failure and released by hand.
6. Wire Connecting
Connecting the battery
Plug the terminal of Extra battery in the control board.
NOTE:If you not use gate operator and power failure, please pull out the extra battery terminal.
Fig.7
Release
Release key
Release hole
Battery
BLACK TO Charge BAT -
RED TO Charge BAT +
Battery
RED TO SOLAR BAT +
BLACK TO SOLAR BAT -
SOLAR PANEL
