Phoenix Contact UM EN TP 3 Series, User Manual

Page: 10 / 70

TP 3057M, TP 3057T, TP 3070T, TP 3105T, TP 3121T
1-2
PHOENIX CONTACT 8095_en_00
1.3 Intended Use
– The device is designed for use in the industry.
– The device is state-of-the art and has been built to the latest standard safety require-
ments. However, dangerous situations or damage to the machine itself or other prop-
erty can arise from the use of this device.
– The device fulfills the requirements of the EMC directives and harmonized European
standards. Any modifications to the system can influence the EMC behavior.
1.4 Target Group
All configuration, programming, installation, commissioning, operating and maintenance
work in connection with the automation system must be performed by trained personnel
only (e.g. qualified electricians, electrical engineers, etc.).
The configuration and programming personnel must be familiar with the safety concepts of
automation technology.
The operating personnel must have been trained in handling the controller and be familiar
with the operating instructions.
The installation, commissioning and maintenance personnel must have an education which
entitles them to work on automation systems.
NOTICE: Radio Interference
This is a class A device. This device may cause radio interference in residential areas. In
this case, the user may be required to introduce appropriate countermeasures, and to
bear the cost of same.