Phoenix Contact UM EN TP 3 Series, User Manual

Page: 34 / 70

TP 3057M, TP 3057T, TP 3070T, TP 3105T, TP 3121T
2-24
PHOENIX CONTACT 8095_en_00
Settings, Contrast:
n the Setup Main operating mode display, default values are used for contrast and bright-
ness. This ensures display even in the event of faulty values. Changing a value requires
confirmation in an additional dialog box. The values are not accepted if Cancel is pressed
or confirmation does not take place within 5 seconds.
Depending on the display type, different values can be modified:
This entry is able to be password-protected.
Settings, Date / Time:
Set the date and time. Press Refresh to update the values.
Settings, Password:
The password can be activated, deactivated or redefined. When the password is activated,
all password-protected dialog boxes can only be accessed if the password has been en-
tered successfully.
This entry is able to be password-protected.
Settings, Information:
The following informations are displayed:
Serial number, product id, image version, built date, size of flash memory, size of SRAM,
size of PLC / visu RAM and bus clock rate.
OPC Res Edit:
The OPC Resource Editor is started. Resource, type and parameter settings can be made.
This entry is able to be password-protected.
Table 2-3
Display type Contrast Brightness
STN (mono) X -
STN (color) X X
TFT - X
The prefix "-ip" must always be retained. (e.g.: -ip192.168.42.1)