Phoenix Contact UM EN TP 3 Series, User Manual

Page: 55 / 70

Interfaces of the Device
8095_en_00 PHOENIX CONTACT
4-19
4.4.2 Ejecting the Memory Card
To remove the card, press the ejection button on the operating device.
Figure 4-16 Ejecting the memory card
4.5 Shielding D-SUB Connectors
You must shield D-SUB connectors as follows:
Figure 4-17 Shielding D-SUB connectors
1 D-SUB connector
2 Shield
3 Cable clip
4 Cable
The shield must be folded back into a flat position over the cable sheath.
When fastening the cable with the cable clip, as much of the shielding as possible must be
in contact with the housing and sufficient strain relieve must be ensured.