Phoenix Contact UM EN TP 3 Series, User Manual

Page: 27 / 70

Installation and Commissioning
8095_en_00 PHOENIX CONTACT
2-17
2.4 Switching On
The Windows CE operating system is installed on the operating device. Running on the op-
erating system is the visualization runtime software Visu+.
2.4.1 Loading Procedure on Windows CE Operating System
The touch panel allows you to make changes to the configuration at start procedure with the
buttons.
The touch panel has two operating modes:
– Normal (no button pressed)
– Setup Main ( Press For Setup Main Menu button pressed)
2.4.1.1 Normal Mode
The program AppStarter.exe starts from the internal Flash memory.
Figure 2-16 Display after startup
2.4.1.2 Setup Main Mode
If you press the Press For Setup Main Menu button during the startup phase, the "Setup
Main" mode starts.
Press For Setup Main Menu
Admin
Please, note that the device is accessible over the Ethernet only after assignment of an IP
address to the Ethernet.
Some settings are password-protected. The password is "+-+-".