onlinecomponents.com
Description of the Inline Controller
7805_en_02
PHOENIX CONTACT
2-35
Figure 2-25
Basic wiring of an output with a load (L)
(shown using the ILC 150 ETH as an example)
Connector 4
Input terminal points
3.1
I5
Input 5
4.1
I6
Input 6
3.2, 4.2
24 V
Supply voltage U
M
for 2 and 3-wire termination
3.3, 4.3
GND
Ground contact for 3-wire termination
3.4
I7
Input 7
4.4
I8
Input 8
Table 2-7
Terminal point assignment (continued)
Terminal point
Assignment
Remark
The inputs are supplied with 24 V DC from the main supply (U
M
).
The outputs have protection when the ground connection is interrupted and must be wired
accordingly.
For the connection of sensors or actuators in 3-wire technology, Phoenix Contact
recommends using connectors for digital 4-channel or 16-channel Inline terminals
(not supplied as standard, see "Accessories" on page 5-8).
ILC 150 ETH
L
ILC 150 ETH
L
74060016