AXC F X152
PHOENIX CONTACT
107708_en_08
A Appendix
A 1
Updating the firmware via the shell
A 2
Shell commands for controlling the firmware
A 3
Replacing the HTTPS certificate
You can replace the HTTPS certificate currently used for the controller with a third-party cer-
tificate. The HTTPS certificate comprises two files: https_cert.pem and https_key.pem.
To replace the files on the controller, proceed as follows:
•
Open the SFTP client software (e.g., WinSCP).
•
If necessary:
Enter the IP address of the controller in the “Computer name” input field.
•
Log in as an administrator.
In the delivery state, the following access data is set:
User name: admin
Password: printed on the controller.
•
Open the /opt/plcnext/Security/Certificates/https directory.
The two files https_cert.pem and https_key.pem are located in this directory.
•
Replace the two files with the third-party certificate files.
For information on the firmware update via the shell, please refer to the
PLCnext Technology Info Center
For information on controlling the firmware (start, stop, restart) via shell commands,
please refer to the
PLCnext Technology Info Center
Please note:
The third-party certificate files must have the same designation as the original files.
•
If necessary, rename the third-party certificate files to https_cert.pem and
https_key.pem.
