Startup
8482_en_03
PHOENIX CONTACT
55
Figure 6-9
Message window following BootP
The IP address is now permanently stored in the controller's internal parameterization mem-
ory.
Deactivate BootP
•
Click the "Deactivate BootP" button to deactivate the BootP server (B in Figure 6-8 on
The shutdown is indicated in the Message Window (refer to Figure 6-9).
Testing network settings
Follow these steps to test the assigned network settings:
•
Open the Bus Configuration Workspace.
•
Select the controller in the "Bus Structure" window.
•
In the "Device Details" window, select the "Communication" tab.
•
Click the "Test" button to test the assigned network settings.
A successful communication test is indicated by the text "Host Type: AXC 1050" displayed
with a green background.
Figure 6-10
Successful communication path test
If you use the SD card as the main memory (see Section 6.8), the IP address settings are
saved on the SD card.