Phoenix Contact 1201132, User Manual

Page: 75 / 148

Description of parameter settings
109908_en_00 PHOENIX CONTACT
75 / 146
10.3 Rotary switch in "STATUS" position
In this position different status values are shown such as output frequency (Hz), output
current (A), output voltage (V), output power factor (cos phi), PTC, output power (kW), and
IGBT temperature (°C). Change the display values with [UP] or [DOWN].
When the output frequency status is in display, "Hz" is shown.
When the output current status is in display, "A" is shown.
When the output voltage status is in display, "v" is shown in position 5.
When the output power factor status is in display, "q" is shown in position 1.
When power status is in display, "P" is shown in position 1.
When IGBT temperature is in display, "°C" is shown in position 1 and 2.
LED numbers 1 ... 5 indicate the displayed digit from left to right on the control panel, as
shown in the figure below.
Figure 10-3 Displayed digits
Can be set
during operation
Leading
alphabet
Parameter
name
Setting range Factory
default
- - Status Read only Read only
1 2 3 4 5