Phoenix Contact 1005869, User Manual

Page: 31 / 52

Web-based management
108452_en_01 PHOENIX CONTACT
31 / 50
Figure 5-10 “Bluetooth Settings” web page
Modify the following data on the “Bluetooth Settings” page:
– Operating Mode: NAP (Access Point)
– Connectable: Yes
– PIN: (Unique key, 4 ... 6 digits, e.g., “123456”)
– Optional: Local Name (Descriptive name for the wireless cell)
Apply the settings with “Save and Reboot”.
Configuring the other devices
Assign a unique IP address on the “Network Settings” page.
On the “Bluetooth settings” page, the device remains in PANU mode but the following
values need to be changed:
– Connection Scheme: Connect to MAC
– PIN: Security key, identical to the NAP key
– Press the “Scan for Devices” button.
If the NAP is located in close proximity, the NAP address can be selected from the drop-
down list after just a few seconds.