Phoenix Contact 1005869, User Manual

Page: 12 / 52

FL EPA 2
12 / 50
PHOENIX CONTACT 108452_en_01
3.1.3 Connectors
Figure 3-4 M12 connectors
Table 3-1 Power supply (M12 male connector, A-coded)
Graphic Pin Function
1 Power (9 V DC - 30 V DC)
2 Digital input ground
3 Power supply ground
4 Digital input + (9 V DC - 30 V DC)
5 Functional ground
All LEDs except the LAN LED are illuminated if voltage is present at the digital input during
the boot process. The device is only ready to operate after another voltage reset.
The digital input function can be specified using the ATS2710/ATS4001 command. By
default, the device switches forward within the roaming list in the event of a falling edge.
The device is reset to its default settings if voltage is present at the digital input for more
than 10 sec.
If the line length exceeds 3 meters, the signal line for the digital input must be carried in the
same cable as the power supply and functional ground.
Table 3-2 LAN cable (M12 female connector, D-coded)
Graphic Pin Function Color coding (T568B)
1 Send Tx + Orange/white
2 Receive Rx + Green/white
3 Send Tx - Orange
4 Receive Rx - Green