Phoenix Contact 1005869, User Manual

Page: 27 / 52

Web-based management
108452_en_01 PHOENIX CONTACT
27 / 50
Table 5-1 Regulatory domains and WLAN channels
5.1.4.1 Extended settings
Figure 5-6 “WLAN Settings” web page
Bridge mode (client operating mode)
Layer 3 IP forward (default) - Several connected network devices support layer 3-
transparent communication
Several network devices can be connected behind the WLAN client. Communication can
only be carried out on an IP basis. This mode is suitable for every WLAN-compliant access
point.
Layer 2 tunnel - Layer 2-transparent connection between two EPA 2 modules
This mode is suitable for all types of communication (e.g., PROFINET) and can also be used
for several devices behind the wireless module. The performance is somewhat lower than
in “Cloned MAC” mode. This mode can only be used between two EPA 2 modules.
Layer 2 cloned MAC only - Layer 2-transparent communication for one device
The device for which the MAC address needs to be entered supports layer 2-transparent
communication (e.g., for PROFINET) with the network. This mode is suitable for every
WLAN-compliant access point.
Cloned MAC Address - Enter the MAC address for “Layer 2 cloned MAC only” (see
above).
2.4 GHz 5 GHz
WORLD 1-11 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116,
132, 136, 140
ETSI 1-11, 12, 13 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116,
120, 124, 128, 132, 136, 140
FCC 1-11 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116,
132, 136, 140
The output power for some channels is reduced in accordance with the legal directives.
Because of the scan, it takes longer to establish the connection if WORLD mode is
deactivated.