Phoenix Contact 1005869, User Manual

Page: 30 / 52

FL EPA 2
30 / 50
PHOENIX CONTACT 108452_en_01
5.1.7 Bluetooth settings - Mode-specific
Figure 5-9 “Bluetooth Settings” web page
“PANU” mode only
Scan for Devices - Scans the environment for Bluetooth devices. To connect to a device,
select it from the drop-down menu after scanning.
Connect To - Specifies if a NAP or PANU should be connected.
Connection Scheme - Choose whether to select a Bluetooth device by MAC address or by
name (“Local Name”) when connecting manually.
“NAP” mode only
List Nearby Devices - Lists Bluetooth devices discovered in the wireless range.
5.1.7.1 Configuration examples
Connection in “Connect to MAC” mode
A Bluetooth connection based on MAC addresses is established quickly. In addition,
devices do not need to be set to “Visible”, i.e., the access point (NAP) does not need to
respond to search requests from other Bluetooth devices.
When replacing a device, the configuration of other devices may need to be adapted.
Configuring the central device (“NAP”)
Assign a unique IP address on the “Network Settings” page.
Connections can only be initiated in “PANU” mode.