Phocos CMLup, User Manual

Page: 19 / 95

Dear Customer,
Congratulations on buying your Phocos product! Please read the instructions carefully and
thoroughly before using the product. Your new CMLup controller is a “state-of-the-art” device
which was developed in accordance with the latest available technical standards. It comes with
a number of outstanding features, such as:

Clear, readable display of the state of charge

New housing design

Acoustic signal when the state of charge changes

Low voltage disconnect regulated by state of charge or voltage

USB connector for mobile phone charging or small music players/devices

Max. 16 mm 2 connector binding posts (10mm² stranded wire with cable end sleves)

Complete electronic protection
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important instructions for CMLup controller that shall be followed during
installation, operation and maintenance of the charge controller.
RISKS OF FIRE , USE CONTROLLER WITHIN 0,5 m OF BATTERIES!
Battery type: Lead acid (GEL, AGM, flooded)
Nominal voltage rating of the battery: 12 or 24 V
Battery fuse: Use a fast acting fuse with an interruption rating capacity of 1000 A on the battery
side. We recommend to use a fast acting melting fuse (e. g. car type fuses) as close as possible
to the battery terminal. The maximum current rating should be 1.5 times of the nominal current
of the charge controller.
Please do not disassemble or attempt to repair Phocos products. Phocos charge controllers do
not contain user serviceable parts.
17
EN