47
6
Switch off with
STANDBY/ON
m
.
The programmed recording will only function when the video
recorder is
switched off
with
STANDBY/ON
m
.
If any of the TIMER blocks are in use, '
k
' will light up on the video
recorder display.
Problems and solutions for programmed
recordings
PROBLEM
SOLUTION
The video recorder
does not react
b
While a programmed recording is being made, you cannot operate your video recorder manually.
If you want to cancel the programmed recording, press
STANDBY/ON
m
.
'
k
' will flash in the
video recorder display
b
The video recorder was switched on several minutes before the start of a programmed recording.
Switch off the video recorder with
STANDBY/ON
m
. A programmed recording (timer) will
only function if the video recorder is switched off.
b
No cassette was inserted. Insert a cassette and switch off the video recorder using
STANDBY/ON
m
.
Cassette is ejected
during recording
b
The end of the tape was reached during recording.
The '
PROT
' error
message appears
briefly in the display
then the cassette is
ejected
b
A cassette was inserted with the security tab removed. Undo the erase protection (chapter
'Manual Recording', section 'Preventing accidental erasing of cassettes') or insert a different
cassette.
Error message: '
FULL
'
b
If this error message appears after pressing
TIMER
k
, then all TIMER blocks are already
programmed. No more recordings can be programmed. If you want to clear or check a
programmed recording (TIMER block), select it with
;q
P
or
P
r=
.
ENGLISH
Programming a recording (TIMER)
Summary of Contents for VR620/58
Page 5: ......
