45
Problem solving for programmed
recordings
PROBLEM
SOLUTION
The video recorder
does not react
b
While a programmed recording is being made, you cannot operate your video recorder manually.
If you want to cancel the programmed recording, press
STANDBY/ON
m
.
'
SWITCH TO
STANDBY- TIMER
RECORDING
' flashes on
the TV screen
b
The video recorder was switched on several minutes before the start of a programmed recording.
Switch off the video recorder with
STANDBY/ON
m
. A programmed recording (timer) will
only function if the video recorder is switched off.
A cassette was
automatically ejected
during recording
b
The end of the tape was reached during recording.
Error message: '
NO
CASSETTE
' '
k
' will
flash in the video
recorder display
b
No cassette was inserted. Insert a cassette and switch off the video recorder using
STANDBY/ON
m
.
The '
PROTECTED
CASSETTE
' error
message appears
briefly on the screen
then the cassette is
ejected
b
A cassette was inserted with the security tab removed. Undo the erase protection (chapter
'Manual Recording', section 'Preventing accidental erasing of cassettes') or insert a different
cassette.
Error message: '
ALL
TIMERS OCCUPIED
'
b
If this error message appears after pressing
TIMER
k
, then all TIMER blocks are already
programmed. No more recordings can be programmed. If you want to clear or check a
programmed recording (TIMER block), select it with
;q
P
or
P
r=
.
The '
DATA ERROR
'
message appears on
the screen
b
The data for the recording could not be transferred. Please check date, start time and end time
of the programmed recording.
ENGLISH
Programming a recording (TIMER)
Summary of Contents for VR620/58
Page 5: ......
