33
US
Set dialing mode (Tone/Pulse)
Dialing mode applies only when you are making a telephone call. Your phone is by default set to tone dialing.
You can switch to pulse dialing if necessary.
1. In idle mode, press
.
2. Select
ADVANCED SET
and press
OK
.
3. Select
DIAL MODE
and press
OK
. The current setting is displayed.
4. Select
TONE
or
PULSE
and press
OK
to confirm.
Flash duration
Your phone comes with 2 factory programmed flash durations. Check with your local service provider if you
are not sure which duration to use.
1. Press .
2. Select
ADVANCED SET
and press
OK
.
3. Select
FLASH
and press
OK
. The current duration is displayed.
4. Select
FLASH 1
or
FLASH 2
.
5. Press
OK
to confirm.
Area code formatting
Enter the 3 digits local area code so that the caller ID can be formatted properly.
1. Press .
2. Select
ADVANCED SET
and press
OK
.
3. Select
AREA CODE
and press
OK
.
4. Enter the area code.
5. Press
OK
to confirm.
Set display contrast
1. In idle mode, press
.
2. Select
PERSONAL SET
and press
OK
.
3. Select
CONTRAST
and press
OK
. The current setting is displayed.
4. Press UP / DOWN
to adjust the contrast and press
OK
to confirm.
Temporary tone dialing in pulse dial mode
If the dialing mode is set to pulse, you can long press
to set temporary tone dialing.
d
will be
displayed on the screen. All the following digits will be dialed as tones until you hang up.
Other features
Summary of Contents for VOIP 321
Page 1: ...User manual Charge the handset s for 24 hours before use ...
Page 2: ......
Page 48: ...48 US Notes ...
Page 49: ......