background image

sPDS-480ca  Product 

Guide

4

Installation

sPDS-480ca is a power / data supply designed for large-scale Ethernet LED lighting 
installations using low-voltage fixtures from Philips Color Kinetics. sPDS-480ca delivers 
480 watts of output and automatically accommodates input voltages ranging from 
100 VAC to 240 VAC. Onboard controls incorporate automatic fixture discovery, 
addressing, and testing. sPDS-480ca is available in 7.5 V and 24 V versions to meet the 
power requirements of different fixtures. 

Owner / User Responsibilities

It is the responsibility of the contractor, installer, purchaser, owner, and user to install, 
maintain, and operate sPDS-480ca in such a manner as to comply with all applicable 
codes, state and local laws, ordinances, and regulations. Consult with the appropriate 
electrical inspector to ensure compliance.

Plan the Installation

To streamline installation and ensure accurate con

fi

 guration, start with a layout or a 

lighting design plan that shows the physical layout of the installation and identi

fi

 es the 

locations of all lighting 

fi

 xtures, power / data supplies, controllers, switches, and cables.

Ethernet Con

fi

 guration

sPDS-480ca is designed for use in Ethernet networks. Typical Ethernet installations 
with Philips Color Kinetics LED fixtures include an Ethernet switch, an Ethernet 
controller such as Light System Manager or Video System Manager Pro, Ethernet 
Controller Keypads for light show triggering, and one or more sPDS-480ca devices.

In an Ethernet environment, each Philips Color Kinetics power / data supply has a 
unique IP address. Each fixture connected to the device is automatically assigned  
unique identifiers that controllers use to identify and manage the fixture.

Maximum data cable lengths are 328 ft (100 m) between Ethernet devices without a 
repeater. The number of fixtures that each sPDS-480ca unit can support depends on 
the power requirements of the speci

fi

 c 

fi

 xtures that you are using. See the table on the 

following page for the maximum quantities of each 

fi

 xture that you can connect per 

device.  

sPDS-480ca 7.5 V

Light
System
Manager

Ethernet
Switch

PC

iColor Flex MX

E

 

Refer to the sPDS-480ca Installation 

Instructions for speci

fi

 c warning and caution 

statements.

PDS-480 ca

Ethernet

Switch

328 ft (100 m) Max

Typical Ethernet Installation

E

 

To connect sPDS-480ca to a DMX 

Controller such as iPlayer 3 or a third-party 
controller, use the Multi-Protocol Converter 
with a Power-over-Ethernet (PoE) injector or 
PoE switch.

Summary of Contents for sPDS-480ca













Reviews: