Philips SH3L 170X4, Service Manual

Page: 4 / 71

170X4 4
Connecting The Monitor
Go to cover page
Connecting to Your PC
Setp 1: Plug the power cord into monitor firmly.
Note: If you use an Apple Macintosh, you need to connect the special
Mac adapter to one end of the monitor signal cable.
Setp 2 :
a) Remove the arm box's top cover ,Press the center of the cap and
open the cap from sides (Do not attempt to open the cap from the
top or the bottom)
b) Fix the cables to the hook
c) Place the cables inside the arm box and lock the cables with grip
on the base.
d) Replace top cover
We recommend you follow intelligent cable management to reduce
the electrical alternating field to low level as not to burden the work
environment with unnecessary factors.
Setp 3: Connect to PC
(A) Turn off your computer and unplug its power cable.
(b) Plug the power cord of your computer and your monitor into a
nearby outlet.
(c) Connect the monitor signal cable to the video connector on the
Back of your computer.
(D) Turn on your computer and monitor. If the monitor displays an
image, installation is complete.
Setp 4: Attach back cover to keep desk clear of unsightly wires.
Setp 5 : To remove back cover