Philips SH3L 170X4, Service Manual

Page: 15 / 71

170X4 15
Go to cover page
Mechanical Instructions
Step 5. Remove the scaler board as Fig. 11.
- Disconnect the FFC cables and 1502 &1503 cables.
- Remove the six screws.
Fig. 11
Fig. 12
======>
***************************************************************************
In warranty, it is not allowed to disassembly the LCD panel, even the
backlight unit defect.
Out of warranty, the replacment of backlight unit is a correct way
when the defect is cused by backlight (CCFL,Lamp).
***************************************************************************
1072 313818876831 FFC 50/60/5061406
1082 313818879411 FFC 30/60/30 61331
======>
7310 932217946682 IC SM M29W010B-90K1 (ST00)
============>
1502
1503
Step 6. Remove the power board as Fig. 12.
- Disconnect the two backlight cables .
- Remove the four screws.
======>
Backlight cables
Step 7. Disconnect the Lightframe and control board as Fig. 13.
Fig. 13
Scaler
Power
Control Light frame
1048 823827712941 TFT-LCD MOD CLAA170EA03(CPT0)
1048 932219888682 TFT-LCD QD17ER01
(QUDI) B
Fig. 14
Step 4.Remove the
Use the thin "I" type screw driver to open the clicks as Fig.10.
Back cover
- Remove the Light frame board as Fig. 9.
-
Fig.9
===>
===>
Right and Left view
Fig.10
Step 8. Panel information as Fig. 14.