Philips SE430 User Manual Download Page 48

Page: 48 / 52

Troubleshooting

Troubleshooting of the phone

Problem

Causes

Solution

The

icon is not blinking

when the handset is placed
on the base

• Bad battery contact
• Dirty contact

• Battery is full

• Move the handset slightly
• Clean the battery contact with a

cloth moistened with alcohol

• No need to charge

No dialling tone

• No power

• Batteries are empty

• You are too far from the base

station

• Wrong line cable
• Line adaptor (when needed) is

not connected to the line cord

• Check the connections. Reset

the phone: unplug and plug
back in the mains

• Charge the batteries for at least

24 hours

• Move closer to the base station

• Use the line cable provided
• Connect the line adaptor (when

needed) to the line cord

Poor audio quality

• You are too far from the base

station

• The base station is too close to

electrical appliances, reinforced
concrete walls or metal
doorframes

• Move closer to the base station

• Move the base station at least

one metre away from any elec-
trical appliances

The

icon is blinking

• Handset is not registered to

the base station

• You are too far from the base

station

• Register the handset to the base

station

• Move closer to the base station

The copy from my mobile
phone SIM card to SE430
phonebook is not complete.

Only phonebook entries from
your mobile phone SIM card will
be transferred; the phonebook
entries that are stored on your
mobile phone memory will not be
transferred.

Transfer the phonebook entries
that are on your mobile phone
memory to your mobile phone
SIM card and then to your SE430.

SE430_IFU_EN.book Page 48 Wednesday, September 20, 2006 2:14 PM

Summary of Contents for SE430





















































Search results

Summary of Contents for SE430

Reviews:

Related manuals for SE430

Brands by name

Popular brands

Philips SE430, User Manual

Search results

Summary of Contents for SE430

Reviews:

Related manuals for SE430

Brands by name

Popular brands