19
SimplyGo User Manual
Alarm Indicators and Screen Symbols
Visual, Audio
Indicators
Description
What To Do
3 short
beeps
+
1 long beep
No Breath Alarm
This alarm occurs when
a breath is not detected
for a period of 2 minutes
or more� It can be
silenced by pressing the
Alarm symbol shown on
the screen� This alarm
becomes silent as soon as
a breath is detected� If no
breath is detected after
approximately 30 minutes,
the device shuts down to
conserve power� (This alarm
is inactive for ten minutes
after startup�)
Check the
connection from
the cannula to the
device� Make sure
the nasal cannula
is properly
positioned on
your face and
that you are
breathing through
your nose�
Make sure the
cannula tubing
is not kinked or
obstructed�
3 long beeps
+
1 short beep
Low Oxygen
Concentration Alarm
This alarm occurs when the
device is delivering a lower
concentration of oxygen
than specified� This alarm
can be silenced by pressing
the Alarm symbol�
Change to another
source of oxygen
and contact
your equipment
provider�
1 long beep
after 2 minutes
High Breath Rate Alarm
This alarm indicates that
the user’s breath rate is
exceeding the capacity of
the device� The device is still
working properly and is still
providing oxygen at the rate
specified for the setting� The
beeps can be silenced by
pressing the Alarm symbol�
The indicator
resets itself when
the breath rate
is reduced� If this
indicator regularly
occurs, contact
your home care
provider�
Summary of Contents for Respironics SimplyGo
Page 1: ...1083700 1079142 R01 CV 12 21 11 SimplyGo ...
Page 3: ......
Page 43: ......
Page 83: ......
