User Manual
19
Using ProntoNEO
4 Tap
Learn
on the Mode screen.
ProntoNEO is now in Learn Mode. ‘Learn’ and the label of the selected device
appear at the top of the touch screen.
5 Use, if necessary, the Page Up or Page Down button to go to the next
button you want to learn.
6 Press the soft or hard button you want to learn on the ProntoNEO.
The Learn label changes to
Learning
, which means ProntoNEO is ready to
receive commands from an existing remote control. The ProntoNEO will wait
for 5 seconds to receive an IR code from another remote control.
Note
When a hard button is pressed to learn, there is no on screen feedback to indicate
which button is pressed.
7 Press and hold the button on the existing remote control you want to
learn to the ProntoNEO.
When the ProntoNEO receives an IR code:
• You hear a confirmation beep;
• The label changes from Learning to OK. The Learn sequence has been
successful.
ProNeo 01-08-2001 14:40 Pagina 19
