background image

16

Philips · PPX 4350

9 Settings

1

Switch the device on using the on/off switch on the 
side.

2

After the initial screen the main menu appears.

3

Use the navigation keys to select 

Extras

4

Confirm with 

à

.

5

Use 

/

 to select from the following settings.

6

Confirm with 

à

.

7

Modify the settings using 

à

/

8

Confirm with 

à

The 

 key takes you one step back in the menu.

Overview of the Menu 
Functions

Image settings

Wall paper

 – Select background images

Fit Screen

 – Convert videos and images to Original, 

Optimal or Zoom resolution

Projection mode

Front

 – Normal projection; the device is located 

in front of the projection surface/screen

Rear

 – Rear projection; the device is located 

behind the projection surface; the image is 
reflected horizontally.

Rear ceiling

 – The device is located behind the 

projection surface, hanging from the ceiling in an 
upside-down position; the image is rotated 
through 180 degrees and reflected horizontally.

Ceiling

 – The device is hanging from the ceiling in 

an upside-down position; the image is rotated 
through 180 degrees.

Wall color correction

 – Colour correction of the 

projected image to adjust to coloured projection 
surfaces

Smart Settings

 – Select predefined settings for 

brightness / contrast / colour saturation. If you mod-
ify these settings, the setting is switched to 

Stand-

ard

.

Brightness

 – Adjust brightness

Contrast

 – Adjust contrast

Saturation

 - Adjust saturation

Sound Settings:

Volume

 – Adjust the volume

Bass

 – Set the playback of the low frequencies

Treble

 – Set the playback of the high frequencies

Key beep

 – Turn key tones on and off

Video settings

View

 – Display all videos in a list or a corresponding 

folder structure on the drive.

Repeat

 – Set the repeat type for video files: Repeat 

deactivated (

Off

), repeat all videos in a directory 

(

Directory

), repeat only the current video (

Movie

), 

repeat all videos (

All

).

Resume play

 – If this function is activated, playback 

will continue at the position it was last stopped. If 
deactivated, playback will always start at the begin-
ning of the video.

Music settings

View

 – Show all tracks in a list or a corresponding 

folder structure on the drive.

Screen

 – Activate or deactivate the projection dur-

ing playback.

Repeat

 – Set the repeat type for music files: Repeat 

deactivated (

Off

), repeat all songs in a directory 

(

Directory

), repeat only the current song (

Song

), 

repeat all songs (

All

).

Shuffle

 – Activate this function for random playback. 

Otherwise, playback will take place in sequence.

Picture settings

View

 – Display the images as a 

thumbnail

 or as a 

list

during selection in the main menu.

Time per slide

 – Image viewing time during slide 

show

Repeat

 – Set the type of repeat for slide show pho-

tos: Repeat off (

Off

), repeat all photos in the direc-

tory (

Directory

), repeat all stored photos (

All

).

Slide transition

 – Set image transitions

Slideshow order

 – Play slide show in order or ran-

domly

Power Save

Brightness mode

Optimal

: the brightness according to your set-

tings.

ECO mode: 

this function reduces the light out-

put in order to increase the operating time for 
the built-in battery. When operating from the 
power supply, the energy saving mode is always 
deactivated in order to ensure the best-possible 
image display.

Sleep mode

 – With this function, the projector 

automatically shuts down after a specified period of 
time or at the end of a movie.

Auto demo mode

 – Switching demo mode on and off. 

In this mode, Pocket Projector is continuously displayed 
on the screen and video and/or audio files placed in in-
ternal memory are read directly.

Bluetooth

 – Enables the function and select the Blue-

tooth device.

Language

 – Select the desired language for the menu.

Maintenance

Reset settings

 – Reset settings to factory defaults.

Firmware Update

 – Update Firmware

Information

 – Display free space in the internal 

memory and information on the device (Capacity: / 
Free space: / Firmware version: / Device name: / 
Model: / MCU Version:)

Notice

Connect for the duration of the firmware 
update the power adapter.

PPX4350_UM_EN_253624544.book  Page 16  Jeudi, 29. janvier 2015  11:35 11

Summary of Contents for PPX 4350



























Reviews: