Page
7
of
33
13. Once settings are correct then press the [Menu] button to save those changes.
Lastly, press the [Back] smart button to get out of the submenu and main menu.
Recording format
The recording format determines the audio quality of recordings and affects the
number of audio files that can fit on the memory card.
QP – Quality Play requires 1 megabyte for 5 minutes of recording.
SP – Standard Play requires 1 megabyte for 10 minutes of recording.
Note: A memory card has storage capacities of up to 32 GB (gigabytes) over 100
hours of recording time.
1. Press the [Menu] button while the recorder is on the ‘Stop’ position.
2. Press the
+
plus or
–
minus buttons to scroll to the ‘Setup’ menu option. Press
the [Menu] button again or the [Enter] smart button to go to the submenu.
3. Press the
+
plus or
–
minus buttons to scroll to ‘Record Format’ and press the
[Menu] button again or the [Enter] smart button.
4. Press the
+
plus or
–
minus buttons to choose between ‘QP’ or ‘SP’.
5. Press the [OK] smart button to save settings.
6. Press the [Back] smart button to get out of the submenu and main menu.
Volume Setting
1. Press the [Menu] button while the recorder is on the ‘Stop’ position.
2. Press the
+
plus or
–
minus buttons to scroll to the ‘Setup’ menu option. Press
the [Menu] button again or the [Enter] smart button to go to the submenu.
3. Press the
+
plus or
–
minus buttons to scroll to ‘Volume’ and press the [Menu]
button again or the [Enter] smart button.
4. Press the
+
plus or
–
minus buttons to get it just below the halfway mark on the
Min side.
5. Press the [OK] smart button to save settings.
6. Press the [Back] smart button to get out of the submenu and main menu.
Microphone Sensitivity
Set the microphone sensitivity for the type of environment. Since the recorder will
be used for court hearings set this on High - Conference.
High – Conference (used when recording at a conference)
Medium – Dictation (used when recording dictation in a normal environment)
Low – Private (used when recording dictation in a noisy environment)
1. Press the [Menu] button while the recorder is on the ‘Stop’ position.
2. Press the
+
plus or
–
minus buttons to scroll to ‘Setup’ menu list and press the
[Menu] button again or the [Enter] smart button to go to the ‘Setup’ submenu.