background image

GC8620

6-12

FILLING DOOR MOLDED 17

TRAY RUBBER CAP 19

TRAY CAP MOLDED 20

TRAY PRINTED 21

WATER TANK ASSY 23

Disassemble 

FILLING DOOR MOLDED 17

Remove  

TRAY RUBBER CAP 19 (4x)

Remove  

Screw K1, K2, K3, K4

Remove  

TRAY CAP MOLDED 20 (2x)

Remove  

Screw L1, L2

Disassemble 

TRAY PRINTED 21

Remove  

Screw N1, N2, N3, N4, N5

Disassemble 

WATER TANK ASSY  23

RINSE CAP ASSY 24

SAFETY CAP 25

INOX CLAMP 26

BRAIDED RUBBER HOSE BOILER 27

ELECTROVALVE 28

SPACER TOP 29

RINSE HOUSING CAP PRINTED 30

RINSE HOUSING MOLDED 31

O-RING 32

BOILER ASSY 33

BOILER SUPPORT BRACKET 34

SPACER BOTTOM 35

BOILER THERMISTOR ASSY 36 

Disassemble 

RINSE CAP ASSY 24

Remove  

Screw N1, N2, N3, N4, N5

Disassemble 

WATER TANK ASSY  23

Remove  

SAFETY CAP 25

Release  

INOX CLAMP 26 (2x)

Disassemble 

BRAIDED RUBBER HOSE BOILER 27

Release 

Hose clip

Disconnect 

Wires

Disassemble 

ELECTROVALVE 28

Remove  

Screw O1, O2

Remove  

Screw P

Remove  

SPACER TOP  29

Remove  

Screw Q

Disassemble 

RINSE HOUSING CAP PRINTED 30

Remove  

Screw R

Disassemble 

RINSE HOUSING MOLDED 31

Disassemble 

O-RING 32

Disassemble 

BOILER ASSY  33

Disassemble 

BOILER SUPPORT BRACKET 34

Remove  

SPACER BOTTOM 35

Disassemble 

BOILER THERMISTOR ASSY  36

DISASSEMBLY ADVICE - STAND

Summary of Contents for PerfectCare Aqua GC8620













Reviews: