10
EN
11
EN
English
8
5
.................................. TV: red fasttext key.
STB: Red, C.
VCR/DVD/STB: searches fast
backwards.
2
/ GUIDE
.............. VCR/DVD: starts playback.
DVD: pressed together with
:
selects Electronic Program
Guide.
STB: selects Electronic Program
Guide. Pressed together with
: starts playback.
6
.................................. TV: blue fasttext key.
STB: Blue, B. Pressed together with
: searches fast forward.
VCR/DVD: searches fast forward.
9
.................................... VCR/DVD: stops playback / recording.
TV: green fasttext key.
STB: Green, D. Pressed together with
: stops playback.
0
/ FAV
...................... TV: white fasttext key.
VCR/DVD: starts recording. Pressed
together with
:
favorites.
STB: Favorites. Pressed together with
: starts recording.
;
..................................... TV: yellow fasttext key.
VCR/DVD: pause playback /
recording.
STB: Yellow, A. Pressed together with
: pauses playback.
3.2 Resetting a button to its original function
If an improved button (see chapter
2.2.2
) still does not
function as expected, you can always reset the button to its
original function.
1
In the current device
mode, keep digit buttons
and
pressed
simultaneously for
5 seconds
.
• The remote control is
now in setup mode.
2
Press digit buttons , ,
and , in that order.
• After each button press
the device selection
button blinks once.
3
Press the button you wish
to reset
twice
. E.g. the
22
button.
• After each button press
the device selection
button blinks once.
• The device selection button will blink one more time
to confirm that the button was succesfully reset to its
original function.
4 Service and support
4.1 Frequently asked questions
In this chapter you will find answers to the most frequently
asked questions about your universal remote control.
4.1.1 Setup
I cannot enter setup mode.
Battery level too low or battery lifetime came to an end.
• Replace the batteries. For this see chapter
2.1
.
After replacing the batteries, test if the remote control
still operates your devices. If it does not, you have to set
up the remote control again. For this refer to chapter
2.2
.
The brand code for my device is missing in the ‘Shortlist of
brands’ in the Quick Start Guide.
The ‘Shortlist of brands’ only mentions the most common TV,
STB, DVD player / recorder and VCR brands.
• You will find a complete brand list on page 14-29 of this
user manual.
•
Use ‘9999’ as 4-digit code in case you cannot find your brand
in the complete brand list. Note that using ‘9999’ may result
in a long setup (up to 15 minutes).
Ser
vice
and
suppor
t
2 x
5 sec.
