24
Using the shaver
Note: You can also use the shaver directly from the
mains. Simply connect the shaver to the mains.
shaving
1
Press the on/off button once to switch on the
shaver.
2
Move the shaving heads over your skin. Make
circular movements.
Do not make straight movements.
Your skin may need 2 or 3 weeks to get
accustomed to the Philips shaving system.
3
Press the on/off button once to switch off the
shaver.
4
Clean the shaver (see chapter ‘Cleaning and
maintenance’).
Trimming (PT860 only)
You can use the trimmer to groom your sideburns
and moustache.
1
Press the on/off button once to switch on the
shaver.
2
Push the trimmer slide downwards to open
the trimmer.
You can now start trimming.
3
After trimming, close the trimmer and switch
off the shaver.
-
-
,
EnGlIsh
10
Cleaning and maintenance
Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as petrol
or acetone to clean the appliance.
Clean the shaver after every shave for optimal
shaving performance.
Regular cleaning guarantees better shaving
performance.
Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
Note: Water may leak from the socket at the bottom
of the shaver when you rinse it. This is normal and not
dangerous because all electronics are enclosed in a
sealed power unit inside the shaver.
Cleaning the shaving unit under the tap
1
Switch off the shaver and disconnect it from
the mains.
2
Press the release button to open the shaving
unit.
3
Rinse the shaving unit and hair chamber under
a hot tap for 30 seconds.
Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
Rinse the hair chamber and the inside of the
shaving unit.
-
-
-
-
EnGlIsh
11
