25
Rinse the outside of the shaving unit.
4
Close the shaving unit and shake off excess
water.
Be careful not to hit the shaving unit against
anything while shaking off excess water.
Never dry the shaving unit and the hair chamber
with a towel or tissue, as this may damage the
shaving heads and the coupling spindles.
5
Open the shaving unit again and leave it open
to let the shaver dry completely.
Cleaning the shaving unit with the cleaning
brush
1
Switch off the shaver and disconnect it from
the mains.
2
Press the release button to open the shaving
unit.
3
Pull the shaving unit off the shaver.
4
Turn the lock anticlockwise (1) and remove the
retaining frame (2).
-
2
1
2
1
EnGlIsh
12
5
Remove and clean one shaving head at a time.
Each shaving head consists of a cutter and a
guard.
Note: Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may take
several weeks before optimal shaving performance is
restored.
Remove the cutter from the shaving guard and
clean it with the brush.
Clean the inside and outside of the shaving guard
with the brush.
Put the shaving heads back into the shaving
unit.
PT0/PT35/PT30: Make sure that the
projections of the shaving heads fit exactly into the
recesses.
Put the retaining frame back into the shaving
unit and turn the lock clockwise.
-
-
EnGlIsh
13
