28
8
Insert the lug of the shaving unit into the slot
in the top of the shaver (1). Then close the
shaving unit (2).
Note: If the shaving unit does not close smoothly, check
if you have inserted the shaving heads properly and if
the retaining frame is locked.
Cleaning the trimmer with the cleaning
brush (PT860 only)
Clean the trimmer every time you have used it.
1
Switch off the shaver and disconnect it from
the mains.
2
Push the trimmer slide downwards to open
the trimmer.
3
Clean the trimmer with the short-bristled side
of the cleaning brush. Brush up and down along
the trimmer teeth.
4
Close the trimmer (‘ click’).
Tip: For optimal trimming performance, lubricate the
trimmer teeth with a drop of sewing machine oil every
six months.
1
2
1
2
English
storage
Put the protection cap on the shaver every time
you have used it, to prevent damage.
Replacement
For maximum shaving performance, we advise
you to replace the shaving heads every two years.
Replace damaged shaving heads right away.
Only replace the shaving heads with original HQ8
Philips Shaving Heads.
1
Switch off the shaver and disconnect it from
the mains.
2
Press the release button to open the shaving
unit.
3
Pull the shaving unit off the shaver.
4
Turn the lock anticlockwise (1) and remove the
retaining frame (2).
5
Remove the shaving heads and place new ones
in the shaving unit.
Make sure that the projections of the shaving
heads fit exactly into the recesses.
6
Put the retaining frame back into the shaving
unit and turn the lock clockwise.
-
2
1
2
1
English
15
