■
Select the files that you want
to modify. However, it is
recommended that you click
the ‘Next’ button to select all
directories. The whole
process will then be
automatically completed.
Repairing
Allows you to repair an already
installed NetCam DVR Viewer automatically using the setup program.
■
Select the ‘Repair’ mode and the whole process will be completed
automatically. However, there is a possibility that the repairing process may
not completed properly. In this case, it is to remove and reinstall NetCam
DVR Viewer.
Removing and re-installing
■
Select ‘Remove’ mode
■
The ‘Confirm File Deletion’ window is displayed. Press ‘Yes’ button.
■
During the deleting process, you are prompted to delete share files
MSFLXGRD.OCX, MSCOMCT2.OCX, COMCTL32.OCX. It is
recommended not to delete the files.
After completion, you should install the NetCam DVR Viewer again.
13
NetCam DVR
Section 2
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM Page 13
