Philips MCM119, User Manual

Page: 19 / 24

English
19
Clock/Timer
3
Press TIMER to confirm your desired mode.
➜
The clock digits for the hours flash.
4
Press VOLUME +/- ( VOL+/- on the remote)
to set the hours.
5
Press TIMER again.
➜
The clock digits for the minutes flash.
6
Press
VOLUME +/-
(
VOL+/-
on the remote)
to set the minutes.
7
Press
TIMER
to confirm the time.
➜
The timer is now set and activated.
Activating and deactivating
TIMER
●
Press TIMER on the remote to turn off the
timer or turn on to the last setting again.
➜
If activated, the timer information will display
for a few seconds, then the system resumes to
the last active source or stays in standby mode.
➜
If deactivated, “
OFF
” appears.
Note:
– The system will exit timer setting mode if no
button is pressed within 90 seconds.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
●
Press SLEEP on the remote control once or
more.
➜
Display shows
SLEEP
and one of the sleep
time options in sequence:
90
,
75
,
60
,
45
,
30
,
15
,
90
... if you have selected a time. Once SLEEP is
activated,
SLEEP
is displayed.
●
To deactivate, press SLEEP on the remote
control repeatedly until
SLEEP
disappears, or
press
STANDBY-ON/ ECO POWER
(or
B
on the remote).
pg001-024_MCM119_05 2007.4.20, 10:53 19