Philips MCM119, User Manual

Page: 11 / 24

English
11
Basic Functions
Important!
Before you operate the system,
complete the preparation procedures.
Switching the system on
●
Press
STANDBY-ON/ECO POWER
(or
B
on the remote).
➜
The system will switch to the last selected
source.
●
Press USB , CD , TUNER or AUX on the
remote control.
➜
The system will switch to the selected
source.
Switching the system to Eco
Power Standby mode
●
Press
STANDBY-ON/ECO POWER
(or
B
on the remote).
➜
The backlight for clock display is dim in
standby.
➜
"
ECO PWR
" will be displayed, then the display
screen will go blank.
➜
The ECO POWER LED will be lighted.
●
To view clock time in standby mode, press and
hold
STANDBY-ON/ECO POWER (or
B
on the remote) for more than 3 seconds or
more.
➜
The system enters the standby mode with
clock display.
➜
If the clock has not been set, "--:--" is
displayed.
●
The volume level, interactive sound settings, last
selected mode (ECO Power Standby or normal
standby), source and tuner presets will be
retained in the player's memory.
Power Saving Automatic Standby
As a power-saving feature, the system
automatically switches to Eco Power/ Standby 15
minutes after a CD has reached the end and no
control is operated.
Adjusting volume and sound
1
Press
VOLUME +/-
(
VOL +/-
on the remote)
to decrease or increase the volume.
➜
Display shows the volume level VOL and a
number from MIN1, 2, ...30, 31 MAX.
2
Press DSC repeatedly to select the desired
sound effect: ROCK/ JAZZ/ POP/ CLASSIC .
3
Press DBB to switch bass enhancement on or
off.
➜
Display shows:
DBB
.
4
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜
Playback will continue without sound and the
display shows
MUTE
.
●
To activate sound reproduction you can:
– press
MUTE
again;
– adjust the volume controls;
– change source.
pg001-024_MCM119_05 2007.4.20, 10:52 11