34
Connect Accessory Devices
Peripherals connected to AV3
There are three possible ways to connect your Accessory Devices to the
AV3
input.
&
•
In case of a peripheral with CVBS output, connect the video cable to the
video input of the TV.
•
In case of a peripheral with S-VHS output, connect the video cable to the
S-VIDEO
input of the TV.
•
In case of a peripheral with component video cables, connect them to the
Pb
,
Pr
and
Y
inputs
AND
also connect a video cable to the video input
(in order to have correct picture reproduction).
é
Always connect the audio cables to the peripheral’s
AUDIO L
and
R
jacks
and to the
L AUDIO
and
R AUDIO AV3
jacks on the TV.
When you have a Digital Antenna cable connected to a digital Set top Box,
connect the Set top Box to the
AV4 IN VIDEO 2 Fh
input.
Connect a Set top Box with 2 Fh RGB output to the
H
,
V
,
R
,
G
and
B
jacks
and to the
L
and
R AUDIO
jacks.
Connect a Set top Box with 2Fh Pr, Pb,Y output to the
Pr
,
Pb
and
Y
jacks
and to the
L
and
R AUDIO
jacks.
See also the manual of your High Definition Set top Box.
Note: This television is designed to accept high definition signal standards 480p and -
1080i as specified by the Electronic Industries Association standard EIA770.3.
Set-top boxes from different manufacturers have the possibility of differing output
standards which may cause difficulties for the television to properly display.
Warning: in case you notice scrolling images, wrong colors or no color, no picture, or
even combinations of these on your screen, check if the connections are done in
the right way:
- for Y, Pb, Pr 2Fh: check if the cable colors match with the input connector colors
- for RGB-HV 2Fh: check additionally if the H and V cables are connected to the
respective H and V input connectors, and if necessary exchange
both connections.
AV4 Digital High Definition input
AV 3
IN
Pr
Pb
VIDEO
L AUDIO
R AUDIO
Y
S VIDEO
AV 4
IN
VIDEO 1080i - 2Fh
H
V
Pr
Pb
Y
/ R
/ B
/ G
AUDIO
L
R