55
0054
0056
0057
0891
0944
1
2
3
4
5
T
he remote control supplied with your TV can
also be programmed by entering a specific
code for your type of accessory device. Follow
the instructions below to program the remote
using one of the codes listed on pages 56-57.
1
Look up the codes for your brand of
accessory device.
2
Once you have the codes,
simultaneous-
ly press the SELECT and STANDBY
buttons.
3
Press the NUMBER button
that corre-
sponds to the type of accessory device
you are using.
Digit 1 = Cable
Digit 2 = VCR
Digit 3 = DVD
Digit 4 = SAT
Digit 5 = AMP
4
Press the NUMBERED button to enter
the 4 digit code number from page 56
or 57.
5
Be sure the remote is in the correct
MODE (see previous page) and press
the POWER button.
If the accessory
device powers ON your finished. If it
does not power ON, repeat the procedure
with another code listed. If all codes fail,
the remote will not control your specific
accessory device.
(Example: You have a Cable Box from Archer
and want to program the remote. It’s code is
0049. Press the SELECT and STANDBY button
simultaneously. Press the NUMBER 1 for Cable,
then enter the listed four digit code; i.e.; 1, 0, 0,
4, 9.)
S
ETTING THE
R
EMOTE
C
ONTROL TO
O
PERATE
A
CCESSORY
D
EVICES
Code Entry Method
Codes from
page 56-57
Cable Converter
Satellite Receiver
VCR
