28
EN
Register additional handsets
You can register additional handsets to the base
station. The base station can register up to 3
handsets.
1
Press
MENU/OK
on the handset.
2
Select
[Services]
>
[Register]
.
3
Press and hold on the base station for 5
seconds, then press
MENU/OK
to confirm.
4
Enter the system PIN/passcode. Press
REDIAL/C
to make corrections. Press
MENU/OK
to confirm the PIN/passcode.
Note
•
For models with an answering machine, you hear a
confirmation beep.
»
Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•
If the PIN/passcode is incorrect or no base is found
within a certain period, your handset displays a
notification message. Repeat the above procedure if
registration fails.
Note
•
The preset PIN/passcode is 0000. No change can be
made on it.
Unregister the handsets
1
If two handsets share the same base
station, you can unregister a handset with
another handset.
2
Press
MENU/OK
.
3
Select
[Services]
>
[Unregister]
, then
press
MENU/OK
to confirm.
4
Enter the system PIN/passcode. (The
preset PIN/passcode is 0000). Press
REDIAL/C
to remove the number.
5
Select the handset number to be
unregistered.
6
Press
MENU/OK
to confirm.
»
The handset is unregistered.
Tip
•
The handset number displays beside the handset name
in standby mode.
Restore default settings
You can reset your phone settings to the
original factory settings.
1
Press
MENU/OK
.
2
Select
[Services]
>
[Reset]
, then press
MENU/OK
to confirm.
»
The handset displays a confirmation
request.
3
Press
MENU/OK
to confirm.
»
All settings except the phonebook are
reset.
