21
EN
10 Phone settings
You can customize the settings to make it your
own phone.
Sound settings
Set the handset's ringtone volume
You can select among 5 ringtone volume levels
or
[Off]
.
1
Press
MENU/OK
.
2
Select
[Phone setup]
>
[Sounds]
>
[Ring volume]
, then press
MENU/OK
to
confirm.
3
Select a volume level, then press
MENU/
OK
to confirm.
»
The setting is saved.
Set the handset's ringtone
You can select from 10 ringtones.
1
Press
MENU/OK
.
2
Select
[Phone setup]
>
[Sounds]
>
[Ring
tones]
, then press
MENU/OK
to confirm.
3
Select a ringtone, then press
MENU/OK
to confirm.
»
The setting is saved.
Set the key tone
Key tone is the sound made when you press a
key on the handset.
1
Press
MENU/OK
.
2
Select
[Phone setup]
>
[Sounds]
>
[Key
tone]
, then press
MENU/OK
to confirm.
3
Select
[On]
/
[Off]
, then press
MENU/OK
to confirm.
»
The setting is saved.
Set the docking tone
Docking tone is the sound made when you
place the handset on the base station or
charger.
1
Press
MENU/OK
.
2
Select
[Phone setup]
>
[Sounds]
>
[Docking tone]
, then press
MENU/OK
to
confirm.
3
Select
[On]
/
[Off]
, then press
MENU/OK
to confirm.
»
The setting is saved.
ECO+ mode
When the
ECO+
mode is activated, it
eliminates the radiation of the handset and base
station in standby mode.
1
Press
MENU/OK
.
2
Select
[Phone setup]
>
[ECO+ mode]
,
then press
MENU/OK
to confirm.
3
Select
[On]
/
[Off]
, and press
MENU/OK
to
confirm.
»
The setting is saved.
Note
•
Make sure that all the handsets registered to the base
station are M550/M555 in order to have the
ECO+
feature functioning properly.
•
When
ECO+
is activated, the standby time is reduced.
This is because in
ECO+
mode the base station is not
transmitting any signal in standby mode; therefore the
handset needs to “listen” more frequently for signals
from the base station to detect incoming calls or other
requests from the base station. The time it takes for the
handset to access features like call setup, call log, paging,
and phonebook browsing is also delayed. The handset
will not alert you to link loss in case of power loss or
moving out of range.
