Device Usage
Philips Telemonitoring Set
2-41
Measuring
Blood
Oxygen and
Pulse Rate
Two procedures for measuring your blood oxygen level (%SpO2) and
pulse rate follow, one for each of the two Pulse Oximeter models
available --
M3814A
and
M3814B
. Select the procedure that matches
your Pulse Oximeter.
Note
The Pulse Oximeter Model number is given on the back of the device.
•
M3814A
- Pulse Oximeter with the
Radio Test
button
symbol
on the front of the display.
•
M3814B
- Pulse Oximeter with the
Radio Test
button
symbol
on the front of the display.
Procedure for M3814A Pulse Oximeter
The following steps describe how to use the
M3814A
Pulse Oximeter to
measure your blood oxygen level (%SpO
2
) and pulse rate. By default,
pulse rate is turned off. To turn pulse on, press and hold both the
START
and
test
buttons for more than 3 seconds. Repeating this step will
turn pulse off again.
Step 1.
Sit
within 20 ft.
of the Home Hub or TeleStation with your hand
resting on a flat surface and the Pulse Oximeter in front of you.
Step 2.
Open the sensor and fully insert
your finger (index, middle, or ring,
but not your thumb) until the end of
your finger reaches the finger stop.
The cable should extend
over
your
finger toward your wrist as shown
in the figure.
Step 3.
Sit comfortably with your hand
resting on the surface so that it
can remain still.
T
T
All manuals and user guides at all-guides.com
