Philips LIGHTOLIER CONTROLS LYTESCENE ILSCLTSII, User Manual

Page: 24 / 36

C
ONFIGURING A
M
ASTER
L
YTE
S
CENE
II T
OUCH
S
CREEN
U
SER
’
S
G
UIDE
22
Depending on the mode, the terminal strip will read inputs and write outputs differently.
To configure Master Terminal Strip mode:
Step 1. At ILS Master window, press
Configure Master
tab.
Step 2. At Setup window, press
Options
tab.
Step 3. At Connector Mode drop-down menu, select required mode.
Step 4. Press
OK
.
Table 1: Terminal Strip Signals by Mode
Pin Mode 0 Mode 1 Mode 2 Mode 3
1 LED Common LED Common Not Used
2 OFF LED OFF LED
3 D LED I LED
4 C LED H LED
5 B LED G LED
6 A LED F LED
7 ON LED E LED
8 Button Common Button Common Button Common
Alarm
Cycle
Panel Lock
Remote Lock
9 Lower (1) Lower (1)
10 Raise (1) Raise (1)
11 OFF Button OFF Button
12 D Button I Button
13 C Button H Button
14 B Button G Button
15 A Button F Button
16 On Button E Button
Specify Master’s
16-pin terminal
strip mode