Mechanical Instructions
EN 11
LC7.5E LA
4.
4.3.2
AmbiLight Lamps (if present)
1.
Refer to next figure.
2.
Unplug connectors [1].
3.
Remove the T10 parker screws [2].
4.
Remove the unit by shifting it sidewards [3].
When defective, replace the whole unit.
Figure 4-8 AmbiLight lamps
4.3.3
Keyboard Control Panel
1.
Refer to next figure.
2.
Unplug connector [2].
3.
Remove the T10 parker screws [1].
4.
Remove the unit.
5.
Release clips [3] and remove the board.
When defective, replace the whole unit.
Figure 4-9 Keyboard control panel
4.3.4
Side I/O Panel
1.
Refer to next figures.
2.
Unplug connectors [1]. To release the flatcable connector
[1b], push the two side levers and unplug the connector.
3.
Remove screws [2] and remove the complete module [3].
When defective, replace the whole unit.
Figure 4-10 Side I/O module (1/2)
Figure 4-11 Side I/O module (2/2)
4.3.5
IR/LED Panel
1.
Refer to next figure.
2.
Unplug connectors [1].
3.
Release clip [2] and remove the board.
When defective, replace the whole unit.
Figure 4-12 IR/LED panel
H_17370_039.eps
080807
1
2
2
2
2
2
2
3
3
G_16
8
50_007.ep
s
3
10707
2
1
1
3
H_17370_049.eps
080807
1b
1a
2
2
2
3
H_17370_045.eps
080807
1b
G_16850_009.eps
110107
1
2
