INSTALLATION INSTRUCTION 83
DP 6000 DIGITAL PAGING SYSTEM
Page 27/29
February 1997.
TRANSCEIVER VERSIONS
LBB 6063/02 and LBB 6063/04
The following section describes the installation and program-
ming of the LBB 6063/02 (no display) and the LBB 6063/04
(numeric display only)
INTRODUCTION
The paging transceiver has three main functions:
1. To alert the transceiver carrier when called with one of 14
different bleep patterns.
2. To display 5-digit numeric messages (LBB 6063/04 only).
3. To provide two-way verbal communication between cen-
tral control and other DP6000 transceiver carriers.
KEY TO SYMBOLS (Fig. A1)
1. Antenna
2. 5-digit numeric display
3. Status indication:
Red - Transmitting
Green - Receiving
4. Numeric message memory <Recall> and <Reset> button
(LBB 6063/04 only)
5. Chain securing attachment
6. Up/down to scroll transceiver options
7. Menu button (activates transceiver options)
8.. Label placement
9. Storage rack securing attachment
10. Charging contacts (for use in storage rack)
11. Battery compartment ( 3 x LR1)
12. <Light> button (press to switch on display back-light in low
light conditions). This button can be programmed to trans-
mit the second pilot tone (Opcode programming).
13. ‘Enter’ button (to select options from menu)
14. <Press-to-talk> switch
Rear of transceiver (Fig.A2)
15. <Press-to-talk> switch
16. Storage rack securing attachment
17. Panel mounting screws (4 off)
18. Microphone
19. Loudspeaker
Enter
Light
Menu
Recall
1
2
3
4
5
6
7
8
9
10
9
11
12
13
Fig.A1 Transceiver LBB 6063/04 (front view)
Recall
14
16
16
15
17
16
19
16
Fig.A2 Transceiver LBB 6063/04 (Rear view)
