iColor Flex LMX gen2 Product Guide
18
4. Do one of the following:
• Screw a marquee lens onto the lens holder. Hand tighten to approximately 1.1
to 1.7 Nm (10 to 15 in-lbs).
• Align the tabs on the glare shield with the slots in the glare shield holder, and
snap the glare shield onto the glare shield holder.
5. Repeat steps 2 – 4 for each opening.
6. Once all accessories are installed on the substrate, mount iColor Flex LMX gen2
strands by inserting one node into the back of each lens or glare shield holder.
Press until the nodes snap firmly into the lens or glare shield holders.
