Philips HTS5591, User Manual

Page: 19 / 59

19
English
Wireless connection
Connect your home theater to your router
through a wireless connection.
What you need
•
A network router (with DHCP enabled).
•
A Wi-Fi dongle (Model: Philips WUB1110).
•
A computer with media server software
installed (see ‘Set up media server software’
on page 30).
•
For Online TV and software update, make
sure that the network router has access
to the Internet and is not restricted by
firewalls or other security systems.
Set up the wireless network
Connect your home theater to your router as
shown below, and then switch on the devices.
1
Connect the home theater to a network
router through a wireless connection (see
‘Wireless connection’ on page 19).
2
Turn on your TV, and switch to the correct
source for the home theater.
3
Press ( Home ).
4
Select
[Setup]
, and then press
OK
.
5
Select [Network] > [Network Installation]
> [Wireless (Wi-Fi)] , and then press OK .
6
Follow the instructions on the TV to
complete the setup.
» The home theater connects to the
internet. If connection fails, select [Retry] ,
and then press OK .
7
Select [Finish] , and then press OK to exit.
Set up the wired network
Connect your home theater to your router as
shown below, and then switch on the devices.
1
Connect the home theater to a network
router through a wired connection (see
‘Wired connection’ on page 18).
2
Turn on your TV, and switch to the correct
source for the home theater.
3
Press ( Home ).
4
Select [Setup] , and then press OK .
5
Select
[Network]
>
[Network Installation]
>
[Wired (Ethernet)]
, and then press
OK
.
6
Follow the instructions on the TV to
complete the setup.
»
The home theater connects to the
internet. If connection fails, select [Retry] ,
and then press
OK
.
7
Select [Finish] , and then press OK to exit.
Check wired network settings
1
Press ( Home ).
2
Select
[Setup]
, and then press
OK
.
3
Select
[Network]
>
[View Network
Settings]
, and then press
OK
.
»
The current network settings are
displayed.
LAN
www
EN