Philips HTS3566D, Quick Start Manual

Page: 48 / 66

48
English
Radio Operations
Before you start .....
Ensure that the FM antenna has been
connected to the main unit. (For some
models, the FM antenna has been
connected in the factory).
A
Connect the FM antenna (supplied) to
the FM socket.
B
Attach the other end of the FM antenna
to a wall.
AUX 1 AUX 2
Helpful Hints:
– For better FM stereo reception, connect an
external FM antenna (not supplied).
– Position the antenna as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
Tuning to radio stations
A
Press SOURCE repeatedly until ‘FM’
appears on the display panel (or press
RADIO on the remote control.)
B
Press / on the remote control to
start tuning.
The frequency indication starts to
change until a radio station with suffi cient
signal strength is found.
C
Repeat step
B
if necessary until you fi nd
the desired radio station.
D
To fi ne-tune the reception of a weak
station, press / briefl y and
repeatedly until an optimal reception is
found.
Changing tuning grid
(only applicable for certain regions)
In some countries, the frequency step
between adjacent channels in the
FM Band is 50 kHz (100 kHz in some
areas).
Note:
Changing the tuning grid erases all
previously stored preset radio stations.
A
Press SOURCE repeatedly until ‘FM’
appears.
B
Press x .
C
Press and hold u until ‘GRID 9’ or
‘GRID 10’ appears.
1_hts3566D_78_eng1.indd 48 1_hts3566D_78_eng1.indd 48 10/14/2008 4:47:37 PM 10/14/2008 4:47:37 PM