Philips HTS3562, Manual

Page: 17 / 62

15
English
EN
2
Press BACK , and go to the picture folder.
3
Select a picture, and then press ( Play ) to
start the slideshow.
4
Press to stop slideshow.
5
Press again to stop music.
Note
•
Make sure that the picture and audio formats
are supported by your home theater (see 'File
formats' on page 20 ) .
Radio
Listen to FM radio on your home theater, and
store up to 40 radio stations.
Note
•
AM and digital radio are not supported.
•
If no stereo signal is detected, or if fewer than
fi ve stations are found, you are prompted to
install the radio stations again.
1
Connect the FM antenna to the
ANTENNA FM
on your home theater (if not already connected).
• For the best reception, place the antenna
away from the TV or other sources of
radiation.
2
Press RADIO .
»
If you have already installed the radio stations,
the last channel that you listened to is played.
»
If you have not installed any radio
stations, the message
AUTO
INSTALL...PRESS PLAY
appears on
the display panel. Press ( Play ).
3
Use the remote control to listen or to
change radio stations.
Button Action
/
or
Alphanumeric
buttons
Select a preset radio station.
Navigation
buttons
Left/Right: Search for a radio
station.
Up/Down: Fine tune a radio
frequency.
Press to stop the installation of
radio stations.
BACK Press and hold to erase the
preset radio station.
OPTIONS
Manual:
1) Press OPTIONS . 2)
Press / to select your
preset. 3) Press OPTIONS
again to store the radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
SUBTITLE
Toggle between the stereo and
mono sounds.
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz. Switching the
tuning grid erases all preset radio stations.
1
Press RADIO .
2
Press .
3
Press and hold (
Play
) to toggle between 50
kHz or 100 kHz.
MP3 player
Connect a MP3 player to play audio fi les.
What you need
•
An MP3 player.
•
A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable, connect
the MP3 player to the
MUSIC iLINK
connector on your home theater.
2
Press
AUDIO SOURCE
repeatedly until
MUSIC I-LINK appears on the display panel.
3
Press the buttons on the MP3 player to select
and play audio fi les.