35
English
Restore sound mode settings
Restore the equalizer settings of all the sound
modes to the default values.
1
Press (
Home
).
2
Select
[Setup]
, and then press
OK
.
3
Select
[Audio]
>
[Default sound settings]
,
and then press
OK
.
Language
Select a language for the home menu, audio, and
subtitles.
Home menu
1
Press (
Home
).
2
Select
[Setup]
, and then press
OK
.
3
Select
[Preference]
>
[Menu language]
, and
then press
OK
.
4
Select a menu language, and then press
OK
.
Disc audio
1
Press (
Home
).
2
Select
[Setup]
, and then press
OK
.
3
Select
[Preference]
>
[Audio]
, and then
press
OK
.
4
Select an audio language for discs, and then
press
OK
.
Note
•
If your preferred disc language is not available,
select
[Others]
from the list, and enter the
4-digit language code found at the end of this
user manual.
•
If you select a language that is not available
on a disc, the home theater uses the default
language of the disc.
Sound
Change the sound settings to suit your preference.
HDMI audio
To hear an HDMI audio output from your TV,
connect your home theater to the TV through
an HDMI cable.
1
Press (
Home
).
2
Select
[Setup]
, and then press
OK
.
3
Select
[Audio]
>
[HDMI Audio]
, and then
press
OK
.
4
Select the following options, and then press
OK
:
•
[Bitstream]
: Enable bitstream output
over HDMI.
•
[Auto]
: Automatically select the best
supported audio format.
•
[Off]
: Disable audio from the TV.
Audio post processing
To select a predefined sound mode, enable
audio post processing at the speaker (see ‘Sound
mode’ on page 19).
1
Press (
Home
).
2
Select
[Setup]
, and then press
OK
.
3
Select
[Advanced]
>
[Enhanced Audio]
>
[On]
, and then press
OK
.
Note
•
To play the original audio of the disc, select
[Off]
.
Night mode
For quiet listening, decrease the volume of loud
sounds when you play discs. Night mode is only
available for Dolby-encoded DVD and Blu-ray
discs.
1
Press (
Home
).
2
Select
[Setup]
, and then press
OK
.
3
Select
[Audio]
>
[Night Mode]
>
[On]
, and
then press
OK
.
EN
