5
ENGLISH
Introduction
Congratulations on your purchase, and welcome to Philips!
To fully benefit from the support that Philips offers, register your product at
www.philips.com/welcome
.
Product overview (Fig. 1)
a
Mixing chamber lid
i
Pasta cutter
b
Safety switch hole of the mixing
chamber lid
j
Front panel knobs
c
Power cord
k
Front panel
d
Disc holder safety switch
l
Shaping disc
e
Main unit
m
Disc holder
f
Shaping disc storage
n
Disc holder safety switch lever
g
Water/flour cup
o
Mixing paddle
h
Cleaning brush
p
Mixing chamber
Control panel overview (Fig. 2)
a
On/off button
d
Extrusion only button
b
Display
e
Automatic button
c
Start/pause button
Disassembling and cleaning before first use
1
Remove the mixing chamber lid. (Fig. 3)
2
Loosen the front panel control knobs.
(Fig. 4)
Note:
The front panel is heavy. Take extra caution when removing it.
3
Disassemble the front panel, the shaping disc, the shaping disc holder, the mixing paddle,
and the mixing chamber in order.
(Fig. 5)
4
Clean all detachable parts, and wipe them dry.
(Fig. 6)
Assembling
1
Push the mixing chamber into the appliance. (Fig. 7)
2
Point the mixing paddle to the hole in the main unit. Insert the mixing paddle all the way
into the main unit.
(Fig. 8)
3
Attach the disc holder onto the appliance.
(Fig. 9)
4
Put the shaping disc onto the disc holder , and make sure it is firmly fixed on the disc
holder.
(Fig. 10)
Note:
Make sure the inner cavity of the shaping disc and disc holder is properly fitted. (Fig. 11)
