Philips HP L1530R, Service Manual

Page: 9 / 84

Warning Message
9
Go to cover page
HP L1530R
Warning Message (WM)Table:
Power Saver Table
Power Saver - On Power Saver - Off Note
Quit signal with 1. System blank and show 1. System blank and show
cable WM “Going to Sleep” 3 sec moving WM “No Input
then sleep. Signal” always.
Disconnect 1. System blank and show 1. System blank and show
cable WM “Check Video Cable” 10 WM “Check Video Cable” 10
sec then moving about 50 sec.
sec then moving always.
2. Show WM “Going to
Sleep” 3 sec then sleep.
3. If push any key in sleep
mode, then repeat item 1 to 2.
Out of range –1 1. System blank and show 1. System blank and show H<29.5 or
moving WM “Input Signal moving WM “Input Signal H>82.5 or
out of Range” about 60 sec. out of Range” always. V<49 or
2. Show WM “Going to V>87 or
Sleep” 3 sec then sleep. Vtotal>=120
3. If push any key in sleep 0
mode, then repeat item 1to 2.
Out of range –2 1. Show moving WM 1. Show moving WM DownScaling
“Input Signal out of Range” “Input Signal out of Range” Ex.
60 sec. 60 sec. 1280x1024
2. WM disappear after WM 2. WM disappear after WM (Only for
60 sec. 60 sec. HPL1530R)
3. IF push any key then 3. IF push any key then
repeat 1-2. repeat 1-2.
Out of range –3 1. Show moving WM 1. Show moving WM 85Hz
“Input Signal out of Range” “Input Signal out of Range”
60 sec. 60 sec.
2. After moving WM 60 sec 2. After moving WM 60 sec
then show WM “Going to then show WM “Going to
Sleep” 3 sec then sleep. Sleep” 3 sec then sleep.
3. If push any key in sleep 3. If push any key in sleep
mode, then repeat item 1 to 2. mode, then repeat item 1 to 2.