Philips HP L1530R, Service Manual

Page: 4 / 84

Connecting The Monitor
4
Go to cover page
HP L1530R
Connecting the Monitor :
The monitor has two video signal connectors on the rear panel:
one analog (VGA) and one digital (DVI-D). This allows you to
connect the monitor to up to two computers at the same time.
When two computers are connected, you will need to set the
Video Input Select on the on-screen display (OSD) menu to
specify which monitor input has priority.
1. Place the monitor in a convenient, well-ventilated location
near your computer.
2. Connect the monitor signal cable into the correct video
connector (VGA or DVI-D) on the back of the monitor and
into the corresponding video connector on the rear panel of
the computer.
3. Connect one end of the power cable to the back of the
monitor, and the other end to an electrical wall outlet.
4. Turn on the power source for both the computer and the
monitor.
5. If your monitor includes a PC Comm Station, refer to the
documentation included with the accessory for instructions
on attaching it to your monitor.
WARNING:
To reduce the risk of electric shock or damage
to your
Equipment:
A. Do not disable the power cord grounding plug. The grounding
plug is an important safety feature.
B. Plug the power cord into a grounded (earthed) electrical outlet
that is easily accessible at all times.
C. Disconnect power from the monitor by unplugging the power
cord from the electrical outlet.
D. Do not place anything on power cords or cables. Arrange them
so that no one may accidentally step on or trip over them. Do
not pull on a cord or cable. When unplugging from the
CAUTION:
Burn-in image damage may occur on monitors
that display the same static image on screen for a prolonged
period of time. To avoid burn-in image damage on your monitor
screen, you should always activate a screen saver application or
turn off the monitor when it is not in use for a prolonged period of
time. Image retention is a condition that may occur on all LCD
screens.
Connecting the VGA Signal and Power Cables
Connecting the DVI-D Signal Cable