Philips HP L1530R, Service Manual

Page: 17 / 84

Display Adjustment
25
Go to cover page
7
HP L2025
17
HP l1530R
2.6 Switch light probe to Viewing position.
2.
7 Move the Lens barrel forward or backward to get clear image as
shown in Fig. 4
2.8 Switch light probe to Measuring position. It should be able to
indicate colour value on the CA-110.
2.9 Press Menu buttons to select R G B of 9300 and 6500.
Increase / decrease value by press Plus or Minus buttons until the
1931 CIE chromaticity ( x, y ) as below.
Alignment hits:
R for x value , G for y value, B for Y value on the colour analyzer.
3. NVRAM(24C16) Default Values:
Sub_Bri: 185 255
Sub_Con: 100 12 7 154
VCOM: 152
4. Factory Reset:
After finishing all the adjustment, select Factory Reset function to
recall:
Do an automatic Auto-Adjustment
Set Brightness = 90
Set Contrast = 80
Set Color = 6500K-sRGB
Set Custom Color (R.G.B) = 100
Set OSD Transparency = 0
To leave factory mode by restart the monitor.
5. Main Menu Factory Default Values:
The OSD shall have the following factory default values:
Language = English
OSD Cotrol:
Horizontal OSD position = 50
Vertical OSD position = 50
OSD timeout = 30s
Management:
Power Saver = ON
Power On Recall = ON
Mode display = OFF
Sleep Timer = OFF
Menu = BASIC
Remark:
How to enter aging mode?
1. Disconnect video cable, only connect mains cord..
2. Hold "Menu" and "Plus" key simultaneously, then power On
monitor until aging mode appear.